View source

[[Category: Bambino-210_Manual|C]]
==Appendix C - Configuring Keil MDK for CMSIS-DAP==
Please follow these steps for setting up Keil µVision compiler for debugging the Micromint Bambino using the mbed HDK with CMSIS-DAP firmware.
* 1. Press ALT and F7 on the keyboard to bring up the Options for Target window.
* 2. Click on the "Debug" tab.
* 3. Choose the "CMSIS_DAP Debugger" from the drop down in the upper right hand side of the window. Specify the location of the LPC43xx_spifi.ini initialization file.
[[Image:mbed-dap-1.png|center]]
* 4. Click on "Settings" next to where the debugger was selected to bring up the Target Driver Setup window. Select "JTAG" for multi-core debugging.
[[Image:mbed-dap-2.png|center]]
* 5. Click on the "Flash Download" tab.
* 6. Click the "Add" button.
* 7. Scroll and select "LPC18xx/43xx S25FL032 SPIFI".
* 8. Change the "Size" to 0x4000 and the Target Driver Setup window should look like the image below.
[[Image:mbed-dap-3.png|center]]
----
[[Bambino-210_Manual/Appendix D|NEXT: Appendix D - DFU Firmware Updates]]

[[Bambino-210_Manual/Appendix B|PREVIOUS: Appendix B - Using an External JTAG with the BAM210]]