Lincoln CAN Example - Revision history

Support: /* Compatibility Lincoln 60, Lincoln 60E */

2011-03-11T21:51:44Z

Compatibility Lincoln 60, Lincoln 60E

← Older revision		Revision as of 21:51, 11 March 2011
Line 13:		Line 13:
	* 1. Compile the example with the "#define CAN_TRANSMIT" set to 1		* 1. Compile the example with the "#define CAN_TRANSMIT" set to 1
	* 2. Program one of the Lincolns with the binary and this will be the Lincoln used to transmit CAN messages		* 2. Program one of the Lincolns with the binary and this will be the Lincoln used to transmit CAN messages
-	* 3. Compile the example with the "#define CAN_TRANSMIT" set to 1	+	* 3. Compile the example with the "#define CAN_TRANSMIT" set to 0
	* 4. Program the other Lincoln with the binary and this will be the Lincoln used to receive CAN messages		* 4. Program the other Lincoln with the binary and this will be the Lincoln used to receive CAN messages
	* 5. Disconnect the power to both boards		* 5. Disconnect the power to both boards

Support: /* Compatibility Lincoln 60, Lincoln 60E */

2011-03-11T21:51:02Z

Compatibility Lincoln 60, Lincoln 60E

← Older revision		Revision as of 21:51, 11 March 2011
Line 3:		Line 3:
	==Compatibility [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60], [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60E]==		==Compatibility [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60], [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60E]==

-	The I/O Plus option for the Lincoln ~~add~~ a CAN tranceiver ~~to the Lincoln~~. In ~~orderto~~ run this example you need ~~to have two Lincoln boards~~ with the I/O Plus ~~option and~~ a ~~straight~~ through 2x5 to ~~2xs~~ ribbon cable.	+	The I/O Plus option for the Lincoln adds a CAN tranceiver. In order to run this example you will need the following equipment:
		+
		+	* 1. Two Lincolns with the I/O Plus Option populated
		+	* 2. Two COM ports on a computer
		+	* 3. One 2x5 to 2x5 straght through ribbon cable
		+
		+	Please follow these steps to run the CAN example:
		+
		+	* 1. Compile the example with the "#define CAN_TRANSMIT" set to 1
		+	* 2. Program one of the Lincolns with the binary and this will be the Lincoln used to transmit CAN messages
		+	* 3. Compile the example with the "#define CAN_TRANSMIT" set to 1
		+	* 4. Program the other Lincoln with the binary and this will be the Lincoln used to receive CAN messages
		+	* 5. Disconnect the power to both boards
		+	* 6. Connect the two boards together with the 2x5 to 2x5 ribbon cable on J13
		+	* 7. Open a terminal window for each board set to 115200, 8 data bits, no parity, 1 stop bit, and no hardware handshaking
		+	* 8. Connect a COM port to COM1 of each Lincoln board
		+	* 8. Apply power to the Lincoln that will receive the CAN messages
		+	* 9. Apply power to the Lincoln that will transmit the CAN messages
		+
		+	The following screen shots are of the CAN example in action.

	[[Image:Lincoln_can_tx.png\|center\|alt=Lincoln-60\|frame\|<div align="center">'''Lincoln programmed for CAN to transmit]]		[[Image:Lincoln_can_tx.png\|center\|alt=Lincoln-60\|frame\|<div align="center">'''Lincoln programmed for CAN to transmit]]

Support: /* Compatibility Lincoln 60, Lincoln 60E */

2011-03-11T21:32:58Z

Compatibility Lincoln 60, Lincoln 60E

← Older revision		Revision as of 21:32, 11 March 2011
Line 5:		Line 5:
	The I/O Plus option for the Lincoln add a CAN tranceiver to the Lincoln. In orderto run this example you need to have two Lincoln boards with the I/O Plus option and a straight through 2x5 to 2xs ribbon cable.		The I/O Plus option for the Lincoln add a CAN tranceiver to the Lincoln. In orderto run this example you need to have two Lincoln boards with the I/O Plus option and a straight through 2x5 to 2xs ribbon cable.

-	[[Image:Lincoln_can_tx.png\|center\|'''Lincoln ~~loaded with~~ CAN TX]]	+	[[Image:Lincoln_can_tx.png\|center\|alt=Lincoln-60\|frame\|<div align="center">'''Lincoln programmed for CAN to transmit]]


-	[[Image:Lincoln_can_rx.png\|center\|]]	+	[[Image:Lincoln_can_rx.png\|center\|alt=Lincoln-60\|frame\|<div align="center">'''Lincoln programmed for CAN to receive]]

Support: Created page with '=Controller Area Network (CAN)= ==Compatibility [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60], [http://www.micromint.com/index.php/SBC/lincoln60.html Lincol…'

2011-03-11T21:27:50Z

Created page with '=Controller Area Network (CAN)= ==Compatibility [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60], [http://www.micromint.com/index.php/SBC/lincoln60.html Lincol…'

New page

=Controller Area Network (CAN)=

==Compatibility [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60], [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60E]==

The I/O Plus option for the Lincoln add a CAN tranceiver to the Lincoln. In orderto run this example you need to have two Lincoln boards with the I/O Plus option and a straight through 2x5 to 2xs ribbon cable.

[[Image:Lincoln_can_tx.png|center|'''Lincoln loaded with CAN TX]]

[[Image:Lincoln_can_rx.png|center|]]