Lincoln SSP DAC Example - Revision history

Support: /* Compatibility Lincoln 60, Lincoln 60E */

Support — Tue, 10 Apr 2012 19:38:53 GMT

Compatibility Lincoln 60, Lincoln 60E

← Older revision		Revision as of 19:38, 10 April 2012
Line 3:		Line 3:
	The I/O Plus option of the Lincoln controller line includes a 4-channel 12-bit DAC via the SSP serial synchronous port. These signals are available in the following header:		The I/O Plus option of the Lincoln controller line includes a 4-channel 12-bit DAC via the SSP serial synchronous port. These signals are available in the following header:

-	[[Image:Lincoln-60-DAC.png\|center\|alt=Lincoln-60\|frame\|<div align="center">''Digital to Analog connector pin out]]	+	[[Image:Lincoln-60-DAC.png\|center\|alt=Lincoln-60\|frame\|<div align="center">''Lincoln 60 Digital to Analog connector pin out]]

	The first UART, which is connected to the COM1 on the Lincoln microcontroller board, is configured for 115,200 bits per second, and 8-n-1 mode. When the program is started a message will be printed to the terminal.		The first UART, which is connected to the COM1 on the Lincoln microcontroller board, is configured for 115,200 bits per second, and 8-n-1 mode. When the program is started a message will be printed to the terminal.

Support: /* Compatibility Lincoln 60, Lincoln 60E */

Support — Tue, 10 Apr 2012 19:36:27 GMT

Compatibility Lincoln 60, Lincoln 60E

← Older revision		Revision as of 19:36, 10 April 2012
Line 5:		Line 5:
	[[Image:Lincoln-60-DAC.png\|center\|alt=Lincoln-60\|frame\|<div align="center">''Digital to Analog connector pin out]]		[[Image:Lincoln-60-DAC.png\|center\|alt=Lincoln-60\|frame\|<div align="center">''Digital to Analog connector pin out]]

-	~~This example shows how~~ to ~~use~~ the ~~DAC to generate triangle~~ and ~~square waves~~. ~~The signal output~~ is ~~shown below. In integer format the 12-bit outputs go between 0 and 4095 (0x0FFF) for the range 0.00V to 3.30V in steps of 806 µV. Op-amps or other alternatives should~~ be ~~used~~ to ~~implement scaling and isolation~~.	+	The first UART, which is connected to the COM1 on the Lincoln microcontroller board, is configured for 115,200 bits per second, and 8-n-1 mode. When the program is started a message will be printed to the terminal.
		+

	[[Image:Lincoln_ssp_dac.png\|center\|]]		[[Image:Lincoln_ssp_dac.png\|center\|]]
		+
		+
		+	This example shows how to use the DAC to generate triangle and square waves. The signal output is shown below. In integer format the 12-bit outputs go between 0 and 4095 (0x0FFF) for the range 0.00V to 3.30V in steps of 806 µV. Op-amps or other alternatives should be used to implement scaling and isolation.
		+
		+
		+	[[Image:Lincoln_ssp_dac2.png\|center\|]]

Support: /* Compatibility Lincoln 60, Lincoln 60E */

Support — Tue, 10 Apr 2012 19:32:39 GMT

Compatibility Lincoln 60, Lincoln 60E

← Older revision		Revision as of 19:32, 10 April 2012
Line 1:		Line 1:
	==Compatibility [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60], [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60E]==		==Compatibility [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60], [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60E]==

-	The I/O Plus option of the Lincoln controller line includes ~~four~~ 12-bit ~~DACs~~ via the SSP serial synchronous port. These signals are available in the following header:	+	The I/O Plus option of the Lincoln controller line includes a 4-channel 12-bit DAC via the SSP serial synchronous port. These signals are available in the following header:

	[[Image:Lincoln-60-DAC.png\|center\|alt=Lincoln-60\|frame\|<div align="center">''Digital to Analog connector pin out]]		[[Image:Lincoln-60-DAC.png\|center\|alt=Lincoln-60\|frame\|<div align="center">''Digital to Analog connector pin out]]
		+
		+	This example shows how to use the DAC to generate triangle and square waves. The signal output is shown below. In integer format the 12-bit outputs go between 0 and 4095 (0x0FFF) for the range 0.00V to 3.30V in steps of 806 µV. Op-amps or other alternatives should be used to implement scaling and isolation.
		+
		+	[[Image:Lincoln_ssp_dac.png\|center\|]]

Support: Created page with '==Compatibility [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60], [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60E]== The I/O Plus option of …'

Support — Tue, 10 Apr 2012 19:28:31 GMT

Created page with '==Compatibility [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60], [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60E]== The I/O Plus option of …'

New page

==Compatibility [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60], [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60E]==

The I/O Plus option of the Lincoln controller line includes four 12-bit DACs via the SSP serial synchronous port. These signals are available in the following header:

[[Image:Lincoln-60-DAC.png|center|alt=Lincoln-60|frame|<div align="center">''Digital to Analog connector pin out]]