Support: Created page with '==Compatibility [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60], [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60E]== This example demonstrat…'

Support — Wed, 11 Apr 2012 20:37:43 GMT

Created page with '==Compatibility [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60], [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60E]== This example demonstrat…'

New page

==Compatibility [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60], [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60E]==

This example demonstrates how to use USB device port as a virtual COM port. It will create a USB to RS232 converter using COM1 on the Lincoln.

Please follow these steps to run the usbdev_cdc example:

* 1. Compile the usbdev_cdc example.
* 2. Program the Lincoln with the binary.
* 3. Set JP2 to device.
* 4. Press the "RESET" button.
* 5. If the PC asks load the virtual COM ports driver. It is located in the \Examples\USBDEV\USBCDC\ folder.
* 6. Connect COM1 to the PC serial port with a terminal program set to 115200 bps, 8 data bits, no parity, 1 stop bit, and no hardware flow control.
* 7. Check the device manager to see what Windows assigned the "LPC174xx USB VCom Port" to and open a terminal with the settings of 115200 bps, 8 data bits, no parity, 1 stop bit, and no hardware flow control.
* 8. What ever you type in one terminal will show in the other terminal.

Lincoln usbdev cdc Example - Revision history

Support: Created page with '==Compatibility [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60], [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60E]== This example demonstrat…'