Navigation
SEARCH
TOOLBOX
LANGUAGES
modified on 1 June 2015 at 14:01 ••• 49,595 views

Bambino-210 Manual/Appendix A

From Manuals

(Difference between revisions)
Jump to: navigation, search
(→Appendix A - Updating CMSIS-DAP Firmware)
(→Appendix A - Updating CMSIS-DAP Firmware)
Line 4: Line 4:
* 1. Locate the binary you are trying to download
* 1. Locate the binary you are trying to download
-
* 2. Boot the MBED HDK into CRP DISABLED mode by shorting JP3 while connecting the USB Cable.  
+
* 2. Boot the MBED HDK into CRP DISABLED mode by shorting JP3 while connecting the USB Cable. [[Image:BAM210E_CRP_DISABLED.png|center]] A drive [[Image:CRP_DISABLED.png]] should appear.
-
 
+
-
A drive [[Image:CRP_DISABLED.png]] should appear.
+
* 3. Program the Interface firmware by deleting the firmware.bin file and copying the new binary to the CRP DISABLED disk.
* 3. Program the Interface firmware by deleting the firmware.bin file and copying the new binary to the CRP DISABLED disk.
* 4. Reboot the Interface by disconnecting and reconnecting the USB cable without JP3 shorted  
* 4. Reboot the Interface by disconnecting and reconnecting the USB cable without JP3 shorted  

Revision as of 16:00, 19 March 2014

Appendix A - Updating CMSIS-DAP Firmware

Get the CMSIS-DAP interface firmware

  • 1. Locate the binary you are trying to download
  • 2. Boot the MBED HDK into CRP DISABLED mode by shorting JP3 while connecting the USB Cable.
    A drive Image:CRP_DISABLED.png should appear.
  • 3. Program the Interface firmware by deleting the firmware.bin file and copying the new binary to the CRP DISABLED disk.
  • 4. Reboot the Interface by disconnecting and reconnecting the USB cable without JP3 shorted
  • 5. Verify
  • 6. Finished!

PREVIOUS: References

Retrieved from "https://wiki.micromint.com/index.php/Bambino-210_Manual/Appendix_A"