Bambino-210 Manual/Appendix A
From Manuals
(Difference between revisions)
(→Appendix A - Updating CMSIS-DAP Firmware) |
(→Appendix A - Updating CMSIS-DAP Firmware) |
||
| Line 1: | Line 1: | ||
[[Category: Bambino-210_Manual|08]] | [[Category: Bambino-210_Manual|08]] | ||
==Appendix A - Updating CMSIS-DAP Firmware== | ==Appendix A - Updating CMSIS-DAP Firmware== | ||
| - | |||
| - | |||
* 1. Locate the binary you are trying to download | * 1. Locate the binary you are trying to download | ||
| - | * 2. Boot the MBED HDK into CRP DISABLED mode by shorting JP3 while connecting the USB Cable. [[Image:BAM210E_CRP_DISABLED.png|center]] A | + | * 2. Boot the MBED HDK into CRP DISABLED mode by shorting JP3 while connecting the USB Cable. [[Image:BAM210E_CRP_DISABLED.png|center]] A [[Image:CRP_DISABLED.png]] drive should appear. |
* 3. Program the Interface firmware by deleting the firmware.bin file and copying the new binary to the CRP DISABLED disk. | * 3. Program the Interface firmware by deleting the firmware.bin file and copying the new binary to the CRP DISABLED disk. | ||
* 4. Reboot the Interface by disconnecting and reconnecting the USB cable without JP3 shorted | * 4. Reboot the Interface by disconnecting and reconnecting the USB cable without JP3 shorted | ||
Revision as of 16:04, 19 March 2014
Appendix A - Updating CMSIS-DAP Firmware
- 1. Locate the binary you are trying to download
- 2. Boot the MBED HDK into CRP DISABLED mode by shorting JP3 while connecting the USB Cable. A
drive should appear.
- 3. Program the Interface firmware by deleting the firmware.bin file and copying the new binary to the CRP DISABLED disk.
- 4. Reboot the Interface by disconnecting and reconnecting the USB cable without JP3 shorted
- 5. Verify
- 6. Finished!
