02-01 SimpleLED
From Manuals
(Difference between revisions)
| Line 40: | Line 40: | ||
|- | |- | ||
|} | |} | ||
| - | |||
| - | |||
| - | |||
/* Program Example 2.1: Simple LED flashing | /* Program Example 2.1: Simple LED flashing | ||
| Line 58: | Line 55: | ||
} | } | ||
} | } | ||
| + | |||
| + | [[Image:BAM210_Blinky.jpeg|center|]] | ||
Revision as of 15:20, 17 September 2014
A very simple example that blinks LED1. LED1 blinks around 2 times a second. LED1 is located in the bottom left hand corner of the board.
The LEDs for the MBED-SDK and the Bambino line of microcontrollers are mapped to the following locations:
| PWM1 Output | PIN NAME | BAM210E | BAM210 | BAM200E | BAM200 |
| LED1 | P6_11 | Yellow LED | Yellow LED | Yellow LED | Yellow LED |
| LED2 | P2_5 | Green LED | Green LED | Green LED | Green LED |
| LED3 | P6_1 | RED LED | RED LED | n/p | n/p |
| LED4 | P6_2 | Blue LED | Blue LED | n/p | n/p |
/* Program Example 2.1: Simple LED flashing
*/
#include "mbed.h"
DigitalOut myled(LED1);
int main()
{
while(1) {
myled = 1;
wait(0.2);
myled = 0;
wait(0.2);
}
}
