Eagle enet snmp Example
From Manuals
| (2 intermediate revisions not shown) | |||
| Line 1: | Line 1: | ||
| - | |||
=Ethernet with Snmp (enet_snmp)= | =Ethernet with Snmp (enet_snmp)= | ||
| - | ==Compatibility [http://www.micromint.com/index.php/SBC/eagle-50.html 50E], [http://www.micromint.com/index.php/SBC/eagle-100.html 100]== | + | ==Compatibility [http://www.micromint.com/index.php/SBC/eagle-50.html Eagle 50E], [http://www.micromint.com/index.php/SBC/eagle-100.html 100]== |
SNMP and WebServer Application using lwIP. | SNMP and WebServer Application using lwIP. | ||
| Line 7: | Line 6: | ||
The demo currently uses the first 4 sensor IDs: | The demo currently uses the first 4 sensor IDs: | ||
| + | |||
enterprises.26381.1.1.1.1. | enterprises.26381.1.1.1.1. | ||
| + | |||
0 - LED at PE1 (read/write | 0 - LED at PE1 (read/write | ||
| + | |||
1 - User button at PA6 (read only) | 1 - User button at PA6 (read only) | ||
| + | |||
2 - Nibble PB0-3 configured as input (read only) | 2 - Nibble PB0-3 configured as input (read only) | ||
| + | |||
3 - Nibble PC4-7 configured as output (read/write) | 3 - Nibble PC4-7 configured as output (read/write) | ||
| + | |||
Representative commands (board at 192.168.1.220): | Representative commands (board at 192.168.1.220): | ||
snmpwalk -v 1 -c public 192.168.1.220 | snmpwalk -v 1 -c public 192.168.1.220 | ||
| + | |||
List all base MIBs | List all base MIBs | ||
| + | |||
snmpwalk -v 1 -c public 192.168.1.220 enterprises | snmpwalk -v 1 -c public 192.168.1.220 enterprises | ||
| + | |||
List all private MIBs | List all private MIBs | ||
| + | |||
snmpget -v 1 -c public 192.168.1.220 sysContact.0 | snmpget -v 1 -c public 192.168.1.220 sysContact.0 | ||
| + | |||
Get contact information | Get contact information | ||
| + | |||
snmpset -v 1 -c public 192.168.1.220 sysContact.0 s " support@micromint.com " | snmpset -v 1 -c public 192.168.1.220 sysContact.0 s " support@micromint.com " | ||
| + | |||
Set contact information | Set contact information | ||
| + | |||
snmpget -v 1 -c public 192.168.1.220 enterprises.26381.1.1.1.1.0 | snmpget -v 1 -c public 192.168.1.220 enterprises.26381.1.1.1.1.0 | ||
| + | |||
Get current LED state | Get current LED state | ||
| + | |||
snmpset -v 1 -c public 192.168.1.220 enterprises.26381.1.1.1.1.0 i 0 | snmpset -v 1 -c public 192.168.1.220 enterprises.26381.1.1.1.1.0 i 0 | ||
| + | |||
Turn LED off | Turn LED off | ||
| + | |||
snmpset -v 1 -c public 192.168.1.220 enterprises.26381.1.1.1.1.0 i 1 | snmpset -v 1 -c public 192.168.1.220 enterprises.26381.1.1.1.1.0 i 1 | ||
| + | |||
Turn LED on | Turn LED on | ||
| + | |||
snmpset -v 1 -c public 192.168.1.220 enterprises.26381.1.1.1.1.3 i 10 | snmpset -v 1 -c public 192.168.1.220 enterprises.26381.1.1.1.1.3 i 10 | ||
| + | |||
Set nibble PC4-7 to '1010' | Set nibble PC4-7 to '1010' | ||
| + | |||
[[Image:Eagle_enet_snmp.gif|center|]] | [[Image:Eagle_enet_snmp.gif|center|]] | ||
| + | |||
==References:== | ==References:== | ||
To execute the sensor IDs you can use the command line net-snmp tools for Windows from | To execute the sensor IDs you can use the command line net-snmp tools for Windows from | ||
http://www.net-snmp.org/download.html | http://www.net-snmp.org/download.html | ||
Current revision as of 01:10, 20 June 2010
Ethernet with Snmp (enet_snmp)
Compatibility Eagle 50E, 100
SNMP and WebServer Application using lwIP.
The lwIP private MIB (enterprises.26381) currently has 10 sensor IDs defined but can be easily changed to support many more.
The demo currently uses the first 4 sensor IDs:
enterprises.26381.1.1.1.1.
0 - LED at PE1 (read/write
1 - User button at PA6 (read only)
2 - Nibble PB0-3 configured as input (read only)
3 - Nibble PC4-7 configured as output (read/write)
Representative commands (board at 192.168.1.220):
snmpwalk -v 1 -c public 192.168.1.220
List all base MIBs
snmpwalk -v 1 -c public 192.168.1.220 enterprises
List all private MIBs
snmpget -v 1 -c public 192.168.1.220 sysContact.0
Get contact information
snmpset -v 1 -c public 192.168.1.220 sysContact.0 s " support@micromint.com "
Set contact information
snmpget -v 1 -c public 192.168.1.220 enterprises.26381.1.1.1.1.0
Get current LED state
snmpset -v 1 -c public 192.168.1.220 enterprises.26381.1.1.1.1.0 i 0
Turn LED off
snmpset -v 1 -c public 192.168.1.220 enterprises.26381.1.1.1.1.0 i 1
Turn LED on
snmpset -v 1 -c public 192.168.1.220 enterprises.26381.1.1.1.1.3 i 10
Set nibble PC4-7 to '1010'
References:
To execute the sensor IDs you can use the command line net-snmp tools for Windows from