Lincoln spi sd ffs Example
From Manuals
(Difference between revisions)
(Created page with '=microSD card using FAT file system (sd_card)= ==Compatibility [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60], [http://www.micromint.com/index.php/SBC/lincoln…') |
(→microSD card using FAT file system (sd_card)) |
||
| Line 1: | Line 1: | ||
| - | =microSD card using FAT file system ( | + | =microSD card using FAT file system (spi_sd_ffs)= |
==Compatibility [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60], [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60E]== | ==Compatibility [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60], [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60E]== | ||
Revision as of 19:06, 10 April 2012
microSD card using FAT file system (spi_sd_ffs)
Compatibility Lincoln 60, Lincoln 60E
This example application demonstrates reading a file system from an SD card. It makes use of FatFs, a FAT file system driver. It provides a simple command console via a serial port for issuing commands to view and navigate the file system on the SD card.
The first UART, which is connected to the COM1 on the Lincoln microcontroller board, is configured for 115,200 bits per second, and 8-n-1 mode. When the program is started a message will be printed to the terminal. Type “help” for command help.
References:
For additional details about FatFs, see the following site: