Bambino-210 Manual/Appendix A
From Manuals
(Difference between revisions)
(→Appendix A - Updating CMSIS-DAP Firmware) |
(→Appendix A - Updating CMSIS-DAP Firmware) |
||
| Line 4: | Line 4: | ||
* 1. Locate the binary you are trying to download | * 1. Locate the binary you are trying to download | ||
| - | * 2. Boot the MBED HDK into CRP DISABLD mode by shorting JP3 while connecting the USB Cable. A drive [Image:CRP_DISABLED.png] should appear. | + | * 2. Boot the MBED HDK into CRP DISABLD mode by shorting JP3 while connecting the USB Cable. A drive [Image:CRP_DISABLED.png|||] should appear. |
| - | * 3. Program the Interface firmware | + | * 3. Program the Interface firmware by deleting the firmware.bin file and copying the new binary to the CRP DISABLED disk. |
| - | + | * 4. Reboot the Interface by disconnecting and reconnecting the USB cable without JP3 shorted | |
| - | + | ||
| - | + | ||
| - | * 4. Reboot the Interface | + | |
| - | + | ||
| - | + | ||
| - | + | ||
* 5. Verify | * 5. Verify | ||
Revision as of 15:38, 19 March 2014
Appendix A - Updating CMSIS-DAP Firmware
Get the CMSIS-DAP interface firmware
- 1. Locate the binary you are trying to download
- 2. Boot the MBED HDK into CRP DISABLD mode by shorting JP3 while connecting the USB Cable. A drive [Image:CRP_DISABLED.png|||] should appear.
- 3. Program the Interface firmware by deleting the firmware.bin file and copying the new binary to the CRP DISABLED disk.
- 4. Reboot the Interface by disconnecting and reconnecting the USB cable without JP3 shorted
- 5. Verify
The usual MBED disk appears. Upen the MBED.HTM file. This should bring you to the C027 Platforms Page Remark: The html file contains the build date as a html comment.
- 6. Finished!