Bambino-210 Manual/Appendix A
From Manuals
(Difference between revisions)
(→Appendix A - Updating CMSIS-DAP Firmware) |
(→Appendix A - Updating CMSIS-DAP Firmware) |
||
| Line 1: | Line 1: | ||
[[Category: Bambino-210_Manual|08]] | [[Category: Bambino-210_Manual|08]] | ||
==Appendix A - Updating CMSIS-DAP Firmware== | ==Appendix A - Updating CMSIS-DAP Firmware== | ||
| - | * 1. Locate the binary | + | * 1. Locate the updated CMSIS-DAP binary file |
* 2. Boot the MBED HDK into CRP DISABLED mode by shorting JP3 while connecting the USB Cable. A [[Image:CRP_DISABLED.png]] drive should appear. [[Image:BAM210E_CRP_DISABLED.png|center]] | * 2. Boot the MBED HDK into CRP DISABLED mode by shorting JP3 while connecting the USB Cable. A [[Image:CRP_DISABLED.png]] drive should appear. [[Image:BAM210E_CRP_DISABLED.png|center]] | ||
* 3. Program the Interface firmware by deleting the firmware.bin file and copying the new binary to the CRP DISABLED disk. | * 3. Program the Interface firmware by deleting the firmware.bin file and copying the new binary to the CRP DISABLED disk. | ||
* 4. Reboot the Interface by disconnecting and reconnecting the USB cable without JP3 shorted | * 4. Reboot the Interface by disconnecting and reconnecting the USB cable without JP3 shorted | ||
| - | * 5. Verify | + | * 5. Verify that the MBED disk comes up |
* 6. Finished! | * 6. Finished! | ||
---- | ---- | ||
[[Bambino-210_Manual/References|PREVIOUS: References]] | [[Bambino-210_Manual/References|PREVIOUS: References]] | ||
Revision as of 16:09, 19 March 2014
Appendix A - Updating CMSIS-DAP Firmware
- 1. Locate the updated CMSIS-DAP binary file
- 2. Boot the MBED HDK into CRP DISABLED mode by shorting JP3 while connecting the USB Cable. A
drive should appear. 
- 3. Program the Interface firmware by deleting the firmware.bin file and copying the new binary to the CRP DISABLED disk.
- 4. Reboot the Interface by disconnecting and reconnecting the USB cable without JP3 shorted
- 5. Verify that the MBED disk comes up
- 6. Finished!
