Lincoln pwm dual Example
From Manuals
(Difference between revisions)
Support (Talk | contribs)
(Created page with '=Dual Edge Pulse Width Modulation (PWM)= ==Compatibility [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60], [http://www.micromint.com/index.php/SBC/lincoln60.ht…')
Newer edit →
(Created page with '=Dual Edge Pulse Width Modulation (PWM)= ==Compatibility [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60], [http://www.micromint.com/index.php/SBC/lincoln60.ht…')
Newer edit →
Revision as of 20:34, 11 March 2011
Dual Edge Pulse Width Modulation (PWM)
Compatibility Lincoln 60, Lincoln 60E
The NXP LPC1769 microcontroller used in the Lincoln controller line support six channels of PWM. The PWM signals for this example are mapped to the following locations:
| PWM1 Output | GPIO | Connector | Shared Hardware |
| PWM1.1 | P1.18 | J18 pin 7 | User LED1 (Green) |
| PWM1.2 | P3.25 | J12 pin 30 | Optional Buzzer |
| PWM1.3 | P3.26 | J18 pin 12 | User LED2 (Yellow) |
| PWM1.4 | P2.3 | J2 pin 22 | Optional Keypad |
| PWM1.5 | P2.4 | J2 pin 23 | Optional Keypad |
| PWM1.6 | P2.5 | J2 pin 24 | Optional Keypad |
PWM1.4 was captured on channel 1 and PWM1.5 was captured on channel 2 of the oscilloscope in the image below.
