Lincoln Systick Example
From Manuals
(Difference between revisions)
Support (Talk | contribs)
(Created page with '==Compatibility [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60], [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60E]== This example describes …')
(Created page with '==Compatibility [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60], [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60E]== This example describes …')
Current revision as of 15:42, 11 April 2012
Compatibility Lincoln 60, Lincoln 60E
This example describes how to configure System Tick timer to generate an interrupt every 10ms. In this example the System Tick timer is clocked internal by the CPU clock at 100MHz. After each 10ms, System Tick will generate an interrupt and toggle the P0.4 pin on J2 pin 3 at 50MHz. The signal output is shown below.
