Lincoln UART Auto Baud Detect Example
From Manuals
(Difference between revisions)
Support (Talk | contribs)
(Created page with '==Compatibility [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60], [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60E]== This example demonstrat…')
(Created page with '==Compatibility [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60], [http://www.micromint.com/index.php/SBC/lincoln60.html Lincoln 60E]== This example demonstrat…')
Current revision as of 14:50, 12 April 2012
Compatibility Lincoln 60, Lincoln 60E
This example demonstrates the auto baudrate mode of a UART. After reset type 'A' or 'a' character to start Auto baud rate mode. Once the baudrate is detected a welcome message will be sent to the terminal window. Then press any key to have it read in from the terminal and returned back to the terminal. The first UART, which is connected to the COM1 on the Lincoln microcontroller board, is configured for any baudrate, and 8-n-1 mode.
