Bambino-210 Manual/Appendix C
From Manuals
(Difference between revisions)
(→Configuring Keil µVision Compiler) |
|||
| Line 1: | Line 1: | ||
[[Category: Bambino-210_Manual|10]] | [[Category: Bambino-210_Manual|10]] | ||
==Appendix C - Configuring Keil MDK for CMSIS-DAP== | ==Appendix C - Configuring Keil MDK for CMSIS-DAP== | ||
| - | |||
Please follow these steps for setting up Keil µVision compiler for debugging the Micromint Bambino using the mbed HDK with CMSIS-DAP firmware. | Please follow these steps for setting up Keil µVision compiler for debugging the Micromint Bambino using the mbed HDK with CMSIS-DAP firmware. | ||
* 1. Press ALT and F7 on the keyboard to bring up the Options for Target window. | * 1. Press ALT and F7 on the keyboard to bring up the Options for Target window. | ||
Revision as of 16:55, 21 January 2015
Appendix C - Configuring Keil MDK for CMSIS-DAP
Please follow these steps for setting up Keil µVision compiler for debugging the Micromint Bambino using the mbed HDK with CMSIS-DAP firmware.
- 1. Press ALT and F7 on the keyboard to bring up the Options for Target window.
- 2. Click on the "Debug" tab.
- 3. Choose the "CMSIS_DAP Debugger" from the drop down in the upper right hand side of the window. Specify the location of the LPC43xx_spifi.ini initialization file.
- 4. Click on "Settings" next to where the debugger was selected to bring up the Target Driver Setup window. Select "JTAG" for multi-core debugging.
- 5. Click on the "Flash Download" tab.
- 6. Click the "Add" button.
- 7. Scroll and select "LPC18xx/43xx S25FL032 SPIFI".
- 8. Change the "Size" to 0x4000 and the Target Driver Setup window should look like the image below.
PREVIOUS: Appendix B - Using an External JTAG with the BAM210