Eagle interrupts Example
From Manuals
(Difference between revisions)
Support (Talk | contribs)
(Created page with '__TOC__ =Interrupts (interrupts)= ==Compatibility [http://www.micromint.com/index.php/SBC/eagle-50.html Eagle50], [http://www.micromint.com/index.php/SBC/eagle-50.html 50E], [htt…')
Newer edit →
(Created page with '__TOC__ =Interrupts (interrupts)= ==Compatibility [http://www.micromint.com/index.php/SBC/eagle-50.html Eagle50], [http://www.micromint.com/index.php/SBC/eagle-50.html 50E], [htt…')
Newer edit →
Revision as of 17:14, 17 June 2010
Contents |
Interrupts (interrupts)
Compatibility Eagle50, 50E, 100
This example application demonstrates the interrupt preemption and tail-chaining capabilities of Cortex-M3 microprocessor and NVIC. Nested interrupts are synthesized when the interrupts have the same priority, increasing priorities, and decreasing priorities. With increasing priorities, preemption will occur; in the other two cases tail-chaining will occur. The currently pending interrupts and the currently executing interrupt will be displayed on the OLED; GPIO pins B0, B1 and B2 will be asserted upon interrupt handler entry and de-asserted before interrupt handler exit so that the off-to-on time can be observed with a scope or logic analyzer to see the speed of tail-chaining (for the two cases where tail-chaining is occurring).
