PRO050 Manual/Introduction
From Manuals
Overview
The PRO050 is an inexpensive prototyping board with a large 0.1 inch prototyping area. It makes prototyping circuits for the Eagle 50, Eagle 50E, Lincoln 60 and Electrum 100 easier. Access to GPIO, ADC, DAC, and power is done through stacking connectors. Common footprints for prototyping include pushbuttons, screw terminals, and RJ45 connector. The PRO050 has the option to be configured with a solderless breadboard. Circuits can be built by soldering directly to the prototyping area or built on an optional solderless breadboard
Features
- 15 x 34 prototyping area with 0.1 inch spacing
- 12 position screw terminal footprint
- RJ45 jack footprint
- Two pushbutton footprints
- 2 x 3 jumper footprint
- Stacking configuration
- Optional solderless breadboard
- Dimensions: 3.93 inches x 2.83 inches (100mm x 72mm)
Suggested Parts List
| PRO050 Designation | Manufacturer | Part Description | Part Number |
| J1 | EDAC Inc | Connector Shielded RJ45 | A00-108-262-450 |
| S1, S2 | C&K Components | Pushbutton | PTS645SK43SMTRLFS |
| T1 | Tyco | 12 position screw terminal | 1-284392-2 |
| J2, J14 | Samtec | 2X15 stacking connector | ESQ-115-24-G-D |
| J7 | Samtec | 2X5 stacking connector for ADC | ESQ-105-24-G-D |
| P7 | Sullins | 2X5 female connector for solderless bread board and the ADC | PPTC052LFBN-RC |
| J8 | Samtec | 2X3 stacking connector for DAC | ESQ-103-24-G-D |
| P8 | Sullins | 2X3 female connector for solderless bread board and the DAC | PPTC032LFBN-RC |
| Keystone | Hex Standoffs | 1902F | |
| APM Hexseal | 1/4\" 4-40 screw | R4-40X1/4 |