Lincoln SSP DAC Example
From Manuals
Compatibility Lincoln 60, Lincoln 60E
The I/O Plus option of the Lincoln controller line includes a 4-channel 12-bit DAC via the SSP serial synchronous port. These signals are available in the following header:
Digital to Analog connector pin out
This example shows how to use the DAC to generate triangle and square waves. The signal output is shown below. In integer format the 12-bit outputs go between 0 and 4095 (0x0FFF) for the range 0.00V to 3.30V in steps of 806 µV. Op-amps or other alternatives should be used to implement scaling and isolation.
