Bambino-200 Manual/User Interfaces, Connectors, and Jumpers

From Manuals

The following image shows where the connectors, headers, and jumpers are located on the Bambino 200.

Contents 1 Power Supply 2 User Button and LEDs 3 USB Device 4 Boot Jumper 5 Socket 1 OSX 6 Socket 2 IPSUY 7 Socket 3 AOP 8 Socket 4 AIY 9 Socket 5 KUX 10 Socket 6 ISY 11 Socket 7 UY 12 Socket 8 DHI 13 Socket 9 Y 14 Socket 10 SUX 15 Ethernet 16 MICRO SD 17 XBEE

Power Supply

User Button and LEDs

USB Device

Boot Jumper

Socket 1 OSX

Table 4.4: GPIO alternate functions for J7

Socket Pin #	Gadgeteer Function O	Gadgeteer Function S	Gadgeteer Function X	MCU Symbol
3	GPIO2[5]	GPIO2[5]	GPIO2[5]	P4_5
2	P1.30	AD0.4/VBUS	Analog to Digital Converter 0 Channel 4/Monitors Presence of USB Device Power
3	P0.24	AD0.1/I2SRX_WS/CAP3.1	Analog to Digital Converter 0 Channel 1/I2S Receive Word Select/Timer 3 Capture Input 1
4	P1.31	AD0.5/SCK1	Analog to Digital Converter 0 Channel 5/SSP1 Clock
5	P0.25	AD0.2/TXD3	Analog to Digital Converter 0 Channel 2/UART3 Transmitter
6	P0.3	AD0.6/RXD0	Analog to Digital Converter 0 Channel 6/UART0 Receiver	COM1
7	P0.26	AD0.3/AOUT/RXD3	Analog to Digital Converter 0 Channel 3/DAC Output/UART3 Receiver
8	P0.2	AD0.7/TXD0	Analog to Digital Converter 0 Channel 7/UART0 Transmitter	COM1
9	AGND		Analog Ground
10	AGND		Analog Ground

Socket 2 IPSUY

Socket 3 AOP

Socket 4 AIY

Socket 5 KUX

Socket 6 ISY

Socket 7 UY

Socket 8 DHI

Socket 9 Y

Socket 10 SUX

Ethernet

MICRO SD

XBEE

---

NEXT: Mechanical and Electrical Characteristics

PREVIOUS: Hardware