Bambino-200 Manual/User Interfaces, Connectors, and Jumpers

From Manuals

The following image shows where the connectors, headers, and jumpers are located on the Bambino 200.

Contents 1 Power Supply 2 User Button and LEDs 3 USB Device 4 Boot Jumper 5 Socket 1 OSX 6 Socket 2 IPSUY 7 Socket 3 AOP 8 Socket 4 AIY 9 Socket 5 KUX 10 Socket 6 ISY 11 Socket 7 UY 12 Socket 8 DHI 13 Socket 9 Y 14 Socket 10 SUX 15 Ethernet 16 MICRO SD 17 XBEE

Power Supply

User Button and LEDs

USB Device

Boot Jumper

Socket 1 OSX

Table 4.4: GPIO alternate functions for J7

Socket Pin #	Gadgeteer Function O	Gadgeteer Function S	Gadgeteer Function X	MCU Symbol
1	3.3V	3.3V	3.3V	3.3V
2	5.0V	5.0V	5.0V	5.0V
3	GPIO2[5]	GPIO2[5]	GPIO2[5]	P4_5
4	GPIO2[9]	GPIO2[9]	GPIO2[9]	P5_0
5	DAC	GPIO2[4]	GPIO2[4]	P4_4
6		SSP0_SSEL		P1_0
7	GPIO2[5]	GPIO2[5]	GPIO2[5]	P4_5
8	GPIO2[5]	GPIO2[5]	GPIO2[5]	P4_5
9	GPIO2[5]	GPIO2[5]	GPIO2[5]	P4_5
10	GND	GND	GND	GND

Socket 2 IPSUY

Socket 3 AOP

Socket 4 AIY

Socket 5 KUX

Socket 6 ISY

Socket 7 UY

Socket 8 DHI

Socket 9 Y

Socket 10 SUX

Ethernet

MICRO SD

XBEE

---

NEXT: Mechanical and Electrical Characteristics

PREVIOUS: Hardware