Bambino-200 Manual/User Interfaces, Connectors, and Jumpers

From Manuals

The following image shows where the connectors, headers, and jumpers are located on the Bambino 200.

Contents 1 Power Supply 2 User Button and LEDs 3 USB Device 4 Boot Jumper 5 Socket 1 OSX 6 Socket 2 IPSUY 7 Socket 3 AOP 8 Socket 4 AIY 9 Socket 5 KUX 10 Socket 6 ISY 11 Socket 7 UY 12 Socket 8 DHI 13 Socket 9 Y 14 Socket 10 SUX 15 Ethernet 16 MICRO SD 17 XBEE

Power Supply

User Button and LEDs

USB Device

Boot Jumper

Socket 1 OSX

Table x.x: Gadgeteer Functions for Socket 1

Socket Pin #	Gadgeteer Function O	Gadgeteer Function S	Gadgeteer Function X	MCU Symbol
1	3.3V	3.3V	3.3V	3.3V
2	5.0V	5.0V	5.0V	5.0V
3	GPIO2[5]	GPIO2[5]	GPIO2[5]	P4_5
4	GPIO2[9]	GPIO2[9]	GPIO2[9]	P5_0
5	DAC	GPIO2[4]	GPIO2[4]	P4_4
6		SSP0_SSEL		P1_0
7		SSP0_MOSI		P1_2
8		SSP0_MISO		P1_1
9		SSP0_SCK		P3_0
10	GND	GND	GND	GND

Socket 2 IPSUY

Table x.x: Gadgeteer Functions for Socket 2

Socket Pin #	Gadgeteer Function I	Gadgeteer Function P	Gadgeteer Function S	Gadgeteer Function U	Gadgeteer Function Y	MCU Symbol
1	3.3V	3.3V	3.3V	3.3V	3.3V	3.3V
2	5.0V	5.0V	5.0V	5.0V	5.0V	5.0V
3	GPIO1[0]	GPIO1[0]	GPIO1[0]	GPIO1[0]	GPIO1[0]	P1_7
4			GPIO3[3]	U0_TXD	GPIO3[3]	P6_4
5			GPIO3[4]	U0_RXD	GPIO3[4]	P6_5
6	GPIO2[6]	GPIO2[6]	SGPIO12	GPIO2[6]	GPIO2[6]	P4_6
7		SGPIO13	SGPIO13		GPIO5[12]	P4_8
8	SGPIO14	SGPIO14	SGPIO14		GPIO5[13]	P4_10
9	SGPIO15	SGPIO15	SGPIO15		GPIO5[14]	P4_10
10	GND	GND	GND	GND	GND	GND

Socket 3 AOP

Table x.x: Gadgeteer Functions for Socket 3

Socket Pin #	Gadgeteer Function A	Gadgeteer Function O	Gadgeteer Function P	MCU Symbol
1	3.3V	3.3V	3.3V	3.3V
2	5.0V	5.0V	5.0V	5.0V
3	GPIO2[3]/ADC0_0	GPIO2[3]	P4_3
4	GPIO2[1]/ADC0_1	GPIO2[1]		P4_1
5	ADC1_0	DAC		ADC0_0/ADC1_0
6	GPIO2[2]		GPIO2[2]	P4_2
7			MCOA0	P4_0
8			MCOA1	P5_5
9				P5_7
10	GND	GND	GND	GND

Socket 4 AIY

Socket 5 KUX

Socket 6 ISY

Socket 7 UY

Socket 8 DHI

Socket 9 Y

Socket 10 SUX

Ethernet

MICRO SD

XBEE

---

NEXT: Mechanical and Electrical Characteristics

PREVIOUS: Hardware