CooCox Flash Programmer Download

From Manuals

CooCox CoFlash is a stand-alone Cortex M Flash Programming software for PCs running Microsoft Windows. It can be downloaded from the following website: http://www.coocox.org/CoFlash_Programmer.htm

Follow these steps to program a Cortex M microcontroller using CoFlash and the picoJTAG:

• 1. Open the CoFlash programmer

Figure 2.9: Flash Programmer

• 2. Select picoJTAG as the Adpater
• 3. Select the microcontroller being used
• 4. Select the Command tab
• 5. Browse for the binary or elf file
• 6. Verify that the sector offset and sectors are properly selected. See below figures for further details

Figure 2.10: CoFlash Programmer set-up for Eagle SBC with bootloader

Figure 2.11: CoFlash Programmer set-up for Eagle SBC without bootlader

Figure 2.2: CoFlash Programmer set-up for Lincoln SBC

• 7. Click on the Program button