modified on 1 June 2015 at 14:01 ••• 39,884 views

Bambino-210 Manual/Appendix A

From Manuals

Jump to: navigation, search

Appendix A - Updating CMSIS-DAP Firmware

  • 1. Locate the updated CMSIS-DAP binary file
  • 2. Boot the MBED HDK into CRP DISABLED mode by shorting JP3 while connecting the USB1 Cable. A Image:CRP_DISABLED.png drive should appear.
  • 3. Program the Interface firmware by deleting the firmware.bin file and copying the new binary to the CRP DISABLED disk.
  • 4. Reboot the Interface by disconnecting and reconnecting the USB1 cable without JP3 shorted
  • 5. Verify that the MBED disk comes up
  • 6. Finished!

NEXT: Appendix B - Using an External JTAG with the BAM210

PREVIOUS: References