Lincoln-60 Manual/Appendix A

From Manuals

Appendix A - Updating CMSIS-DAP Firmware

• 1. Locate the updated CMSIS-DAP binary file
• 2. Boot the MBED HDK into CRP DISABLED mode by shorting JP3 while connecting the USB1 Cable. A drive should appear.
  
• 3. Program the Interface firmware by deleting the firmware.bin file and copying the new binary to the CRP DISABLED disk.
• 4. Reboot the Interface by disconnecting and reconnecting the USB1 cable without JP3 shorted
• 5. Verify that the MBED disk comes up
• 6. Finished!

PREVIOUS: References